Read First Before Buy Aim Sports Quad Rail Mount
I put this on my Century Arms L1A1 Fal sporter with Imbel receiver and it fit really well. The only thing is that I had to remove the front harness latch to install this but I dont use a harness in this rifle anyway.It comes with 9 rubber covers as others have said and there are more available elsewhere in the internet to buy if you need them. I put 3 on the lower side and 3 on left and right sides and its enought for a big hand like mine. If you put any rubber cover on the upper rail you deserve to be slapped because it defies the purpose of having a picatiny rail . At 40 USD is half the price of others I saw in the internet and they are all the same most of them manufactured by Aim Sports.I paired it with the Aim sports picatiny scope mount and now it looks really good. Its a really firm and tight fit. I would buy it again without thinking. Im going to put a scope on this rifle and see how it does at the range. Ill post pictures later .
Get your Aim Sports Quad Rail Mount Now!
No problems with install. Dresses up an old weapon quite nicely. Happy with the build quality and appearance. What I received for the price was a nice surprise.
BalasHapusI replaced the plastic handguard with this product, and the swap couldn't have been easier! It's nice and snug, and fit perfectly just millimeters behind the gas adjustment knob. It fits so well that it looks like an original part. I installed a bi-pod to it, and it holds up great under recoil. It also came with rubber grips that slide over the side rails, and it made the FAL a lot more comfortable to hold vs. the old plastic grip.
BalasHapusfit perfect (except for the screw they sent with the rail to hold it together. It will not tread in. I had to used the old screw). Fit my FN FAL Imbel like a glove as advertised.
BalasHapus
BalasHapusI put this on my Century Arms L1A1 Fal sporter with Imbel receiver and it fit really well. The only thing is that I had to remove the front harness latch to install this but I dont use a harness in this rifle anyway.It comes with 9 rubber covers as others have said and there are more available elsewhere in the internet to buy if you need them. I put 3 on the lower side and 3 on left and right sides and its enought for a big hand like mine. If you put any rubber cover on the upper rail you deserve to be slapped because it defies the purpose of having a picatiny rail . At 40 USD is half the price of others I saw in the internet and they are all the same most of them manufactured by Aim Sports.I paired it with the Aim sports picatiny scope mount and now it looks really good. Its a really firm and tight fit. I would buy it again without thinking. Im going to put a scope on this rifle and see how it does at the range. Ill post pictures later .
BalasHapusfit my DSA perfectly. Kind of heavy now but who gives a crap it looks great. Totally worth the buy!
BalasHapusI bought this for my FAL, STG 58. It installed very easy. I like that it came with covers that you can put anywhere on the rails. With rails on all four side there is plenty of options for mounting a foregrip, sites, tactical light, laser, or whatever you want. This is a well made piece that is super affordable.
BalasHapusEXCELLENT! This quad rail is a perfect fit for my L1A1. One issue I had during install was the front bolt that goes in place of the only screw holding the original hand guard. When installing, screw in all the top smaller screws first to help tighten the rails into place, and this will line up the path for the side screw in the front and then it will go in like butter. Otherwise you will end up stripping the main front screw. Voila!
BalasHapusI highly recommend this quad rail for any L1A1 or FN FAL owners! Metric OR Inch versions! This fits both!
This is a excellent piece of workmanship and quality seems to be in the high area . It was an easy fit for the DIY to do
BalasHapus